Instructions for Use - Biosolve™ E
Prepare a stock solution of Biosolve™ E at 0.5% (1:200) to 1% (1:100), or calibrate your dosing equipment to achieve the required dilution (higher concentrations may be required for use under heavily soiled conditions). Spray solution onto all surfaces using a low pressure lance and at an application rate of 500ml/m2. Using hot water (60-65ºC) will improve the effectiveness of the product, particularly in high grease situations. Allow a minimum contact time of 20 minutes before thoroughly rinsing all surfaces with clean water at high pressure.
Prepare a stock solution of between 1 - 2% (1:100 - 1:50) of Biosolve™ E or calibrate your dosing equipment to achieve the required dilution (higher concentrations may be required for use under heavily soiled conditions). Using a foaming lance, apply Biosolve™ E to all surfaces at an application rate of 300ml/m2. Allow a minimum contact time of 20 minutes before thoroughly rinsing all surfaces with clean water at low to medium pressure.
STORAGE
Store in a cool dry place away from other products. Do not allow contact with acids.
DISPOSAL
Dilute small quantities to waste water, via a foul sewer or other treatment facility in accordance with local water authority regulations.
SHELF LIFE
Concentrate 3 years. Diluted product up to one week, if unused.
PACKAGING
Available in 20 and 4 x 5 litre drums, approved to UN Standards.