Instructions for Use - Biosolve™ Plus
Manually prepare a stock solution of between 0.25 - 1% (1:400 - 1:100 dilution) of Biosolve™ PLUS or calibrate your dosing equipment to achieve the required dilution (higher concentrations may be required for use under heavily soiled conditions). Spray the solution onto all surfaces using a low pressure lance and at an application rate of 500ml/m2. Using hot water (60-65ºC) will improve the effectiveness of the product, particularly in high grease situations. Allow a minimum contact time of 20 minutes before thoroughly rinsing all surfaces with clean water at high pressure.
Manually prepare a stock solution of between 0.25 - 1% (1:400 - 1:100 dilution) of Biosolve™ PLUS or calibrate your dosing equipment to achieve the required dilution (higher concentrations may be required for use under heavily soiled conditions). Spray the solution onto all surfaces using a low pressure lance and at an application rate of 500ml/m2. Using hot water (60-65ºC) will improve the effectiveness of the product, particularly in high grease situations. Allow a minimum contact time of 20 minutes before thoroughly rinsing all surfaces with clean water at high pressure.
STORAGE
Store in a cool dry place away from other products.
Do not allow contact with acids.
DISPOSAL
Dilute small quantities to waste water, via a foul sewer or other treatment facility in accordance with local water authority regulations.
SHELF LIFE
Concentrate 3 years. Diluted product up to one week, if unused.
PACKAGING
Available in 20 and 4 x 5 liter drums, approved to UN Standards.