Biosolve™ HD - Instructions for Use
SUPERIOR MULTIPURPOSE HEAVY DUTY CLEANER
Pre-soak all surfaces with clean water, at low pressure, and leave for 1 hour prior to commencing the application of the Biosolve™ HD detergent solution.
SPRAYING
Prepare a stock solution of between 0.25 - 1% (1:400 - 1:100 dilution) of Biosolve™ HD or calibrate your dosing equipment to achieve the required dilution rate (higher concentrations may be required for use under heavily soiled conditions). Spray Biosolve™ HD solution onto all surfaces using a low pressure lance and at an application rate of 500ml/m2. Using hot water (60-65°C) will improve the effectiveness of the product, particularly in high grease challenge situations. Allow a minimum contact time of 20 minutes before thoroughly rinsing all surfaces with clean water at low to medium pressure.
FOAMING
Prepare a stock solution of between 0.5 - 2% (1:200 - 1:50 dilution rate) of Biosolve™ HD or calibrate your dosing equipment to achieve the required dilution rate (higher concentrations may be required for use under heavily soiled conditions). Using a foaming lance, apply Biosolve™ HD solution to all surfaces at an application rate of 250ml/m2. Allow a minimum contact time of 20 minutes before thoroughly rinsing all surfaces with clean water at low to medium pressure.
GENERAL PRODUCT INFORMATION
STORAGE
- Store in a cool dry place.
- Do not allow contact with acids.
DISPOSAL
Dilute small quantities to waste water, via a foul sewer or other treatment facility in accordance with local water authority regulations.
SHELF LIFE
Concentrate 3 years. Diluted product up to one week, if unused.
PACKAGING
Available in 20 and 4 x 5 litre drums, approved to UN Standards.