Girl climbing an inflatable climbing wall

Mesamoll®

Whenever plastics need to have high elasticity and flexibility, plasticizers provide the answer. They also optimize, for example, the processing properties of polymer materials, which leads to improved product quality or even new properties. These can include greater softness, elasticity, flame retardant properties or resistance to chemicals, weathering and migration.
Mesamoll® is a non-phthalate, well-gelling and exceptionally saponification-resistant universal plasticizer for a wide range of polymers, such as PVC, PUR and rubber.

Plasticizers

Plasticizers are substances which, by virtue of their polar or polarizable structure, weaken the secondary valence forces of polymers. By incorporation of plasticizers into compatible polymers, the materials can be modified in such a way that it becomes soft and flexible, even at sub-zero temperatures. The degree of flexibility attainable depends on the type and quantity of plasticizer used. Among the most firmly established plasticizers are esters of aromatic and aliphatic monocarboxylic and aliphatic dicarboxylic acids, sulfonic acid and phosphoric acids.

In practice a plasticizer is expected to combine as many as possible of the following properties:

  • Satisfactory compatibility with the polymer
  • High plasticizing capacity
  • Adequate thermal stability and saponification resistance
  • Low volatility
  • Migration and extraction resistance
  • Low temperature flexibility
  • Fire retardancy

Monomeric and polymeric

A distinction is made according to the molecular structure between monomeric and polymeric plasticizers. The principal properties of plasticized polymers such as modified mechanical data, low-temperature flexibility and low flammability can be achieved through the use of monomeric plasticizers. If the requirements include low plasticizer migration into other plastics, coatings and adhesives or resistance to extraction by other chemicals, polymeric plasticizers from the Ultramoll® range should be used.
In view of the wide range of demands on articles made from plasticized polymers, the addition of a single plasticizer will not usually suffice, and mixtures of plasticizers have to be employed. In this way an attempt is made to find the best possible compromise between the properties of the plasticizers and the range of practical demand on the polymeric material.

Viscosity

Plasticizers of low viscosity and low polarity have a good plasticizing capacity and can be used over a wide range of temperatures, since their viscosity is less dependent on temperature than that of high-polarity plasticizers. Their viscosity–temperature curve is very flat. These plasticizers with special good resistance to low temperatures are used whenever a plasticized polymer is required to have high flexibility even at sub-zero temperatures. Typical low temperature plasticizers include Adimoll® adipates, Uniplex® sebacates and Disflamoll® TOF.

Compatibility

Compatibility of a plasticizer can be determined fairly quickly and simply by way of the dissolution temperature. A PVC / plasticizer suspension (1:19) is heated. The temperature at which the PVC becomes visible and has dissolved completely is known as the dissolution temperature. As a universal rule, the lower this temperature is, the more compatible is the plasticizer. Mesamoll® has a low dissolution temperature of about 120 degree C and is an efficient primary and secondary plasticizer for PVC. In addition, Mesamoll® is a versatile plasticizer demonstrated by divers usability, including PUR sealants and adhesives, in acrylates for metal coatings and in NBR rubbers. The saponification resistance of Mesamoll® allows our customers to produce products with a long service life.

Applications

Many applications for plasticized polymers demand good fire performance. These include PVC cable, coating, flooring, materials used in the mining industry, PVC/NBR insulation foams, thermoplastic polyurethanes and thermosets like PF. Of all the common plasticizers only the phosphoric esters are fire-retardant, the aromatic Disflamoll® DPK and TKP and Reofos® more so than the aliphatic Disflamoll® DPO and TOF. The fire retardant properties can be further improved by the addition inorganic fire-retardants. If other plasticizers with no fire retardant properties are used alongside fire retardant plasticizers, the fire performance of the polymer compound is invariably impaired. 

Some plasticizers develop a high potential regarding scope of use, but they are designed for a specific use. Unimoll® AGF, our largely bio based plasticizer, was developed for the use in articles intended to come into contact with foodstuffs. Our Uniplex Benzoates are mainly solid special plasticizers used in hot-melt adhesive & equipment cleaning. Uniplex 214 is the sulfonamide plasticizer for commodity polyamides in the applications hydraulic tubings, fuel lines and monofilament fibers.

 

Get in touch with us!

Go to downloads Red Download button on keyboard

Downloads

If you are looking for more detailed information, you find all our product-related brochures and factsheets for download here. 
Go to contact formular Businessman touching 3D rendering flying email icon with his finger

Contact and technical service

Interested in our products? Find the right contact person in your region for your individual request.
Get a trade show overview AdobeStock_139732130.jpeg

Trade shows

LANXESS Polymer Additives showcases its products and solutions at various exhibitions worldwide. Use the opportunity and meet us in person. 
X
Usage of Cookies
We would like to use cookies to better understand you use of this website. This enables us to improve your future experience on our website. Detailed information about the use of cookies on this website and how you can manage or withdraw your consent at any time can be found in our Privacy Statement.

OK Other Settings