Europigments

• Cementitious building materials and asphalt
• Plastics
• Paints and varnishes

Supply form: Depending on the field of application, pigments are available in various forms: powder, compacted, granulated and micronized. Our technical department is at your disposal for any questions regarding application, dosage or mixing.

• Powdered pigments: Mainly for coloring construction materials. Due to their chemical structure they are insoluble in water, resistant to the alkalinity of cement and lime, resistant to acids and weather stable
• Compacted pigments (C): Granular/compacted material that allows the dosing of pigments almost without generating dust in the air. Specially designed for coloring cement
• Granulated pigments (G): Pigments in granule form that can be dosed without dust formation in the environment. They facilitate correct dosing, weighing and unloading of silos, big bags and sacks. Pigments for coloring construction materials. 
• Micronized pigments (M): These pigments meet the special requirements of the paint and coatings industry. Due to the micronization process, an intensive grinding process, the level of agglomerates is significantly lower. Therefore these pigments provide high dispersibility.  

• Precast in general
• Ready-mix concrete
• Mortars for facades, brick or tile joints
• Terrazzo, Kopfsteinpflaster, Betonsteine
• Concrete roof tiles

⇒ Download our shade card

• Mortars for pigmentation of exposed brickwork: By using white or gray cement, depending on the case, we can match the color of the brickwork with the color of the laid material (brick, block, natural stone, etc.) or, on the contrary, create a contrast.
• DIY construction: Repairs, rustic finishes, etc.
• Small works: Concrete formwork, concrete paving, facade repairs, tile laying mortar to make mortar stains on the tile invisible. 
• Pigmentation of filler, grout, colored whitewash, etc.
  
  

Supply form:  Cardboard boxes with hermetic polyethylene bag inside, containing 400, 600 or 800 g, depending on the apparent density of the pigment contained. Each package has, on the side, a marking indicating the approximate color resulting from incorporating this pigment to a white cement or a gray cement in the percentage indicated.

Instruuction for use:  Product can be added directly to the base to be pigmented before or after the addition of water, mixing sufficiently until complete dispersion of Hobbycolor is achieved. Dosage: it is recommended to add approximately a maximum of 0.8% of the amount of mortar. For lime mortars it is recommended to double the quantity.

⇒ Download our shade card

⇒ Download our shade card